cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Subnets without VLAN!

Highlighted
Here to help

Subnets without VLAN!

Hello,

 

Is there anyway to define subnets in MX without VLANs?

6 REPLIES 6
Kind of a big deal ww
Kind of a big deal

Re: Subnets without VLAN!

no sir.

Here to help

Re: Subnets without VLAN!

if i create subnets in Security Appliance with different VLAN and placed unmanaged switches in front of every subnet will this work for me?

Kind of a big deal

Re: Subnets without VLAN!


ut sugatis et vide

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
Kind of a big deal

Re: Subnets without VLAN!


@khurram wrote:

if i create subnets in Security Appliance with different VLAN and placed unmanaged switches in front of every subnet will this work for me?


Yes. You just need to set the MX's ports to "Access" mode and specify the VLAN (so subnet) you want for that port. Outside of the MX nothing needs to know about the VLAN ids you chose.

Kind of a big deal

Re: Subnets without VLAN!

You can add a static route via another layer 3 device.
A model citizen

Re: Subnets without VLAN!

As people have said - you must use VLAN's

 

There is no equivalent of port mirroring or subnet shields in Meraki world. 

 

But for you usage, you can put switches on each port and you'll be fine 🙂

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.