Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I have an issue when trying to set up ssh on a 6509, strange because I think I've done the same on another chassis and it works just fine....Anyway these are some configuration and debug outputs to help you help me On the chassi : #show run a...
Thanks Alain,so this is the debug output : Incoming SSH debugging is on6509#*May 5 04:32:29.789: SSH0: starting SSH control process*May 5 04:32:29.789: SSH0: sent protocol version id SSH-2.0-Cisco-1.25*May 5 04:32:29.789: SSH0: protocol version id...
Hi Alain, this is the output from the other chassis : #ssh 10.1.10.4Connection to 6509 closed by remote host.Connection to 6509 closed.Another thing, I'm connecting to the failing chassis through telnet for now. I used the "debug ip ssh" command but ...
Thanks Brandon, I usually use 2k modulus, but during my testing I regenerated the keys with a 1024 and even the default 512b modulus....just in case. But it doesn't seem to be the problem here.thx
