Hello.
I have connected MR 53 AP to the uplink and the authentication type is Radius server.
Issue is When a User(listed in radius server) try to connect to the AP(SSID), the particular user getting IP from native VLAN instead of getting from the user specified VLAN(per user VLAN).
(outcome should be like if the user connects to the AP, user should get a IP from the VLAN specified to that user)
Please help with this issue ASAP.....
Thank You
what type are u using?
A per-user VLAN tag can be applied in 3 different ways:
all vlans are on the trunk?
all dhcp scopes are present?
did you make a wireshark capture on the uplink and check the radius server that its sending the correct attributes?
Yes Sir,
All VLANs are in Trunk port and Dhcp scopes are present..
did you configure to allow radius override?
does the RADIUS attribute match on the ap side and the radius server side? and is this really send to the ap?
override configure means i have just enabled the option( radius response can override vlan tag.)
and i have not added any radius attribute to the AP.
and your radius is sending this?
and did you verify this attributes are send in the packet?
sir, the thing is i have not created any radius server. i have just installed a HP IMC application in Windows Server 2008 R2.
in IMC i have created users so previously when a user connects to ssid the AP checks the username and confirms with radius server means HP IMC and gives the particular VLAN IP. \
BUT
When i Try this whole activity with Meraki AP its not working.
sir, the thing is i have not created any radius server. i have just installed a HP IMC application in Windows Server 2008 R2.
in IMC i have created users so previously when a user connects to ssid the AP checks the username and confirms with radius server means HP IMC and gives the particular VLAN IP.
BUT
When i Try this whole activity with Meraki AP its not working.
The following questions are the preconditions
1. Native VLAN and wireless user vlan gateway normal. Dhcp normal,
2. connect AP switch port is Trunk, set native vlan, ap can online.
3.clould manage set SSID vlan tag wireless user vlan, configure Radius server,
if you still have issues, please check you dhcp or Trunk link, vlan tag, Meraki Cloud sync.
i hope helpful to you!