Traffic Shaping on MX/MR Confusion

[hbs_tblomster]

I'm a little confused on traffic shaping in a pure Meraki stack network.  If I setup traffic shaping on my MX in Security > SD WAN/Traffic Shaping and then go to my wired clients, I can see that they are being affected by a traffic shaping policy and Layer 7 rules.  However, if I go to my wireless clients (I have no traffic shaping applied to my MR) they have 0 rules affecting them for Layer 7 firewall and traffic shaping.

Shouldn't my SD WAN Traffic Shaping policies on the MX affect my wireless clients AND my wired clients? Or, do I need to mirror my traffic shaping I applied on the MX to the MR (SSID level)?

Example of wireless client

Example of wired clientSSID traffic shaping/firewall settings

[NolanHerring]

It would apply to both, see here:

https://community.meraki.com/t5/Dashboard-Administration/Where-to-configure-Traffic-Shaping-MX-MR-or...

[PhilipDAth]

If your wireless clients are bridged to a VLAN where the MX is the default gateway then MX traffic shapping policies will take affect.