Spam wireless traffic to an ethernet port

[Rodrigo_Nascime]

Hi membres.

First of all, sorry because my english is not so good , ok . 

Recently I was required to configure a traffic spam from an specific SSID ( all devices connected) to an specific ethernet port , but I am not able to find this option in the Dashboard , so I am sure if it is possible. 

Follow my devices informations

      Switch - MS425-32  - Firmware 15.18

      AP       - MR53         - Mr295

I appreciate any help.

Thanks.

[RaphaelL]

You can configure a port mirroring : https://documentation.meraki.com/MS/Monitoring_and_Reporting/Packet_Captures_and_Port_Mirroring_on_t...

That way you could capture all trafic from a port ( ap port ) to a different destination port.  You could run wireshark on that destination port and capture all traffic. 

Not sure if that answers your question.

[Rodrigo_Nascime · Accepted solution]

Hi Raphael

Thanks for you answer but unfortunately no, the problem here is because in my scenario the port that the AP is connected has other vlans (production and guests) I can not spam the production vlan because the traffic will be sent to a server which belongs to an external partner.

I need to spam only a guest vlan and in the spam settings page I am not able to spam only one vlan also. 😕

l also raised a ticket in the Meraki support but they just answer me that it is not possible.
So bad, because it would be simple with a 2960 old series switch. 

But no problem, thanks e best regards.