Meraki Wifi authentication based on Okta Radius

[Mateusz2022]

Hey guys, have any of you been able to set up authentication for Meraki Wifi through Okta Radius Agent?

Regards

[alemabrahao]

Check it out.

https://help.okta.com/en-us/Content/Topics/integrations/cisco-meraki-radius-intg-gateway.htm

[rhbirkelund]

I've been messing around with Okta Radius agent as of lately, but in regards to Anyconnect... What do you want to know?

[Mateusz2022]

With Cisco VPN I was able to connect Okta Radius, while for Wireless unfortunately not, according to me there is some problem with the protocol on the Okta side, which is sent by Meraki. Perhaps this protocol is not supported by Okta Agent Radius

[alemabrahao]

Have you checked the article that I sent to you?

[Mateusz2022]

hey, yes, This settings are correct:?

[rhbirkelund]

In principle yes, but it only has to do with Fast Roaming. Not the Okta Implementation in it self.

I've tested with my own Meraki network and my Trial, and I've been unable to get it to work. I think EAP-TTLS is required with Certificates, which I don't have.