MR57

ahmed-baryoul
Comes here often

MR57

hello community 

i'm facing a problem through the configuration of SSID of the MR 57 

i create an account meraki then i create a network and attach the device to it 
mooving on , i configure an SSID for the MR57 but the ssid does not appear in the wifi list but an SSID named "Meraki setup" appears 
what is the problem ? 

5 Replies 5
KarstenI
Kind of a big deal
Kind of a big deal

If you see this SSID, likely, the AP could not register with the cloud.

I would first reset the AP if it was used before somewhere else and make sure that it is connected to a port where a valid IP config is provided by DHCP.

Then make sure the AP comes online in the dashboard. After that you should see your configured SSID.

ahmed-baryoul
Comes here often

thanks 
should i delete it from the Meraki dashboard ? 
then after reset it i add it ? 

KarstenI
Kind of a big deal
Kind of a big deal

You can leave it ion the dashboard network for the reset. It should come online shortly after.

alemabrahao
Kind of a big deal
Kind of a big deal

A very relevant question here is, does the ap appear as online on the dashboard?

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
ahmed-baryoul
Comes here often

thanks
the problem is resolved 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels