@smccloud. Have you already tried to reboot it by disconnecting and reconnecting to see if it can initiate connection to Meraki Cloud again? If so and that did not work try factory default.
Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the MR33 will reboot and be restored to its original factory settings by deleting all configuration information stored on the unit.
https://documentation.meraki.com/MR/Installation_Guides/MR33_Installation_Guide
If all else fails call Meraki support (415)-937-6671 as you may have a faulty device.
Please let me know the results im interested to see if the default works. Ive had APs do this a few times but factory default always seemed to fix the problem.
Cloud Network Engineer | cloudIT
Certified Meraki Networking Associate
Kudo this if it helped! 🙂