Hi,
We are having some issues with clients, being unable to connect, which looks to be due to the channel having too much interference.
I've dropped the auto power settings, which looked to have helped a but, but many are still running higher and the channel is all 36.
Should the MR32's auto switch to a different channel? Our other models seem to, but our MR32 are all running on channel 36, when they are set to auto.
Looking at the spectrum, I can see channel 36 is maxed out, but everything is free.
In the RF profile, all the channels are selected for use and set to auto, but they just don't seem to switch to anything but 36.
Any ideas?
Thanks,
