MR's with dual ethernet

[FrankHWB]

Do these dual ethernet AP's allow for ethernet OUT to addtional AP's or networking?

i guess my question is can they act like a 2 port switch?

[VivekT]

Hi,

Yes, a Meraki AP port (particularly on models like MR52, MR53, MR53E, MR84, and MR57 with dual Ethernet ports) can function like a 2-port switch, allowing you to connect wired devices directly to the AP and pass their traffic through its Ethernet port, provided you configure a "Port Profile" on the AP to enable this functionality; however, you must disable link aggregation on these models if you want to use the second port for wired clients instead of uplink aggregation. 

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/Port_Profileshttps://documentatio...

[FrankHWB]

thank you,

and the same goes with the newer CW models?

also the link in your reply returns a page not found...

[RWelch]

AP Port Profiles 

[RWelch]

MR Link Aggregation Configuration Guide 

[RWelch]

MR57 Dual Uplink High Availability 

[Brash]

The only Catalyst AP that includes dual RJ-45 interfaces is the CW9178.

And yes, it can use the second interface to extend the network.

https://documentation.meraki.com/MR/MR_Installation_Guides/CW9178I_Installation_Guide#Extending_the_...

[VivekT]

Please share the model of CW access point.

MR supports the feature you want.

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/Port_Profiles