Guest Wifi Design - Centralize Access

AhmedJawad
Getting noticed

Guest Wifi Design - Centralize Access

Hi, 

 

  is there a supported design where all guest traffic can go to a centralized " controller" in the data center then from there they can get to the internet? I'm trying to have all of my guest users use one NAT IP address only from all remote sites. the current design is all guests are using the same IP address that the site uses to access the internet. 

 

Thank you  

2 Replies 2
Brash
Kind of a big deal
Kind of a big deal

Depending on your network design, you could look at layer 3 roaming with a concentrator, or vpn tunnelling with a concentrator.

 

This will tunnel all traffic from the SSID to a specific MX.

 

 https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/SSID_Tunneling_and_Layer_3_Roamin...

AhmedJawad
Getting noticed

Thank you !  I will do some testing 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels