CW9163E Meshing

[Patrick24]

Does anyone know if the CW9163E-MR can mesh?

I can't seem to find anything in the documentation.

Thanks

[marce1000]

  - Looks like not : ref https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Wireless_Mesh_Networking
>...

Product Family	Models
Wi-Fi 5 Wave 2	MR20, MR30H, MR33, MR42, MR42E, MR52, MR53, MR53E, MR70, MR74. MR84
Wi-Fi 6	MR28, MR36, MR36H, MR44, MR46, MR56, MR46E, MR76, MR78, MR86
Wi-Fi 6E	MR57, CW9162-MR, CW9164-MR, CW9166-MR

[Brash]

Yes, it supports meshing. It doesn't seem to be explicitly stated in the datasheet but as per the installation guide:

"If used in a mesh deployment, the CW9163E should have a line of sight to at least two other Meraki devices."

https://documentation.meraki.com/MR/MR_Installation_Guides/CW9163E-MR_Installation_Guide

[alemabrahao]

Yes, it does.

https://documentation.meraki.com/MR/MR_Installation_Guides/CW9163E-MR_Installation_Guide

[marce1000]

  - Then the other Meraki document should be updated accordingly, 

 M.

[alemabrahao]

That information is about New Mesh Features in MR 29.1+ Firmware.