We had a wireless expert come in and use 3 different spectrum analyzer (very sensitive) and he's getting clear readings. For some reason the Meraki AP is showing that interference is crazy. We then moved it over to another spot where we knew interference wasn't present and there it was again. Any thoughts?
Solved! Go to solution.
Aaaaaaaaaaaand I'm an idiot lol
Here is the link for the Twitter thread I created:
https://twitter.com/NoLANWiFi/status/1034870853375279106
I also totally forgot that I wrote a blog about it too --_--
Sorry @NolanHerring might've not caught the screenshot in time. DOH! If you do check the solid "red lines" coming across the channels and it shows. Ch1 Ch5 Ch9 Ch11
Aaaaaaaaaaaand I'm an idiot lol
Here is the link for the Twitter thread I created:
https://twitter.com/NoLANWiFi/status/1034870853375279106
I also totally forgot that I wrote a blog about it too --_--
@NolanHerring Thank you. I thought I was alone in this. FYI this all started when people on the 5GHz on channel 40 were getting kicked out form wifi and when I looked at live RF data it showed 50% interference on channel 40. What I've done for a workaround is just disable that channel but from what I can gather it might be the hardware itself and from what it collects it makes "bad decisions" thinking it's helping.