mesh network?

Pogi
Just browsing

mesh network?

Trying to build a lab with wireless APs connecting to LAN and LAN to APs. I made one gateway and one repeater. I connected the repeater to a switch but when I plugged in my PC to the switch I cant get in to the network. it is saying on my Ethernet. Unauthenticated.

2 Replies 2
ww
Kind of a big deal
Kind of a big deal

Did you set: 

Network-wide > Configure > General > Device configuration, find the option to configure Clients wired directly to Meraki APs, and set that option to have clients behave like they are connected to the bridge SSID .

 

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Extending_the_LAN_with_a_Wireless...

Pogi
Just browsing

I did. it seems it is trying to use vlan 206. do I need to add that Vlan to the layer 3 switch where my gateway is connected?

 

Thanks

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels