Splash page Username syslogging

Here to help

Splash page Username syslogging

We have a requirement from the Customer to log Splash Page logins based on the Radius Username and the IP address associated. The current solution sends this to a syslog server. The Meraki syslogs dont seem to contain this information even though the splash logins page has the required info.


Any potential solutions to this?

Kind of a big deal
Kind of a big deal

The RADIUS server normally logs this info.  Have you checked its authentication log?

Its a bespoke server which the customer controls, we can ask the question. The current provider can syslog this info with their Aruba controller.


We will be using ISE for Corporate Authentication. I don't think you can use an ISE splash page with authentication proxied to the other radius server though.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.