Sector Antennas for MR72

SOLVED
Macauley86
Here to help

Sector Antennas for MR72

Do I need to connect both the MA-ANT-21 and MA-ANT-23 sector antennas to an MR72 access point?

1 ACCEPTED SOLUTION
RupertDot11
Meraki Employee

Short answer is yes. 


MA-ANT-21 is for 5GHz band

MA-ANT-24 is for 2.4GHz band

 

2x N-Type antenna ports are located at the top of the MR72 and 2x are located at the bottom of the MR72. The pairs of antenna ports each correspond to the 2 client serving radios. The spectrum that each pair serves is printed on the shell of the MR72.


https://documentation.meraki.com/MR/Installation_Guides/MR_End_of_Sale/MR72_(EOS)_Installation_Guide

 

 

View solution in original post

1 REPLY 1
RupertDot11
Meraki Employee

Short answer is yes. 


MA-ANT-21 is for 5GHz band

MA-ANT-24 is for 2.4GHz band

 

2x N-Type antenna ports are located at the top of the MR72 and 2x are located at the bottom of the MR72. The pairs of antenna ports each correspond to the 2 client serving radios. The spectrum that each pair serves is printed on the shell of the MR72.


https://documentation.meraki.com/MR/Installation_Guides/MR_End_of_Sale/MR72_(EOS)_Installation_Guide

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.