Meraki and Purple

Kebun
Here to help

Meraki and Purple

i'm trying to use Purple as my portal hotspot. So i configure that all i need same as guide purple says. but when i connect to SSID, some device laptop or android can't trough automaticly  purple portal, or try to browse website, it is not automaticly redirect to portal.    any suggestion ?

 

*i attached my SSID configuration. 

screenshot-n70.meraki.com-2019.01.02-17-09-50.png

 

3 REPLIES 3
rakesh_spotipi
New here

Can you post a better screenshot? The image is not really readable. 

Spotipo, all in marketing solution. https://spotipo.com

Might want to provide a link to the guide you followed.

 

From the Meraki point of view, this is the guide to look at to configure EXCAP (External Captive Portal):

https://documentation.meraki.com/MX/Access_Control_and_Splash_Page/Configuring_a_Custom-Hosted_Splas...

 

From your screenshot I'm wondering whether you performed this step:

Enabling a Custom-Hosted Splash page on the Meraki Cloud

  1. Navigate to Configure > Splash page
  2. Select the SSID you want to configure from the SSID drop-down.
  3. Under Custom splash URL select the radio button Or provide a URL where users will be redirected:
  4. Type the URL of your custom splash page:
  5. Click Save Changes.

 

Purple will need to be compatible for this to work properly!

 

Rakesh, here's the OP's screenshot more readable:

Link

wey2go
Getting noticed

This may be of assistance if you have not seen it already:

 

https://create.meraki.io/build/purple/

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels