Meraki Wifi authentication based on Okta Radius

Mateusz2022
Comes here often

Meraki Wifi authentication based on Okta Radius

Hey guys, have any of you been able to set up authentication for Meraki Wifi through Okta Radius Agent?

 

Regards

6 REPLIES 6
alemabrahao
Kind of a big deal
Kind of a big deal

Check it out.

 

https://help.okta.com/en-us/Content/Topics/integrations/cisco-meraki-radius-intg-gateway.htm

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
rhbirkelund
Kind of a big deal

I've been messing around with Okta Radius agent as of lately, but in regards to Anyconnect... What do you want to know?

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.

With Cisco VPN I was able to connect Okta Radius, while for Wireless unfortunately not, according to me there is some problem with the protocol on the Okta side, which is sent by Meraki. Perhaps this protocol is not supported by Okta Agent Radius

Have you checked the article that I sent to you?

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

hey, yes, This settings are correct:?

Mateusz2022_0-1679573375397.png

 

In principle yes, but it only has to do with Fast Roaming. Not the Okta Implementation in it self.

 

I've tested with my own Meraki network and my Trial, and I've been unable to get it to work. I think EAP-TTLS is required with Certificates, which I don't have.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels