MR66 connectivity

Comes here often

MR66 connectivity

Has anyone had issues with clients not connecting to MR66's?  I have a couple that the AP is on the network, broadcasting a signal on both bands but no clients will connect.  If I reboot the AP the clients connect and the AP will work as expected.  This happens randomly and I have not been able to find anything that might cause it and it is causing productivity issues as scanners/mobile printers start to lag and things take longer to process.  Users have to walk to a different area for their devices to work normally.

firmware version MR 26.8.3

Kind of a big deal
Kind of a big deal

What type of authentication are you using? Are 802.11w and 802.11r enabled?

Neither of those are used

Meraki Employee
Meraki Employee

You should contact Meraki Support and have them roll you back to 25.13 and monitor if the issue still persists 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.