MR access point model suggestion

SOLVED
Sy3
Conversationalist

MR access point model suggestion

Hi guys, Can anyone suggest me good model of MR access point, we are deploying wireless network now . We have MX250 firewall and MS250 Access switch, Please suggest high performance and POE compatible access point.

 

Thanks

1 ACCEPTED SOLUTION
KarstenI
Kind of a big deal
Kind of a big deal

With that requirement the MR36 is probably enough. 155 Days lead time ...

All Meraki APs are PoE capable. But the requirements are different. The MR36 is fine with 802.3af, the larger models need 802.3at power.

View solution in original post

3 REPLIES 3
KarstenI
Kind of a big deal
Kind of a big deal

You don't specify what your AP needs to be capable off. So the general advice would be "any of the actual APs" Meaning Wifi6 or better. My device of choice was the MR44 for a quite long time. This changed for some customers to the MR57. Just because an highly expensive AP that you get delivered is better than a less expensive AP that you get delivered in 300 days.

Sy3
Conversationalist

ThanksKarl, the APs would just be used for internet for VIP guests and users, I was thinking MR57, is it POIE compatible?

KarstenI
Kind of a big deal
Kind of a big deal

With that requirement the MR36 is probably enough. 155 Days lead time ...

All Meraki APs are PoE capable. But the requirements are different. The MR36 is fine with 802.3af, the larger models need 802.3at power.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels