Is it possible to get IoT/BLE data real-time, using MQTT.

thejrace
New here

Is it possible to get IoT/BLE data real-time, using MQTT.

Hello. I have a Meraki MR33 AP which I'm trying to get BLE data from. I've managed to get data using Scanning API as described in the following docs.

https://developer.cisco.com/meraki/scanning-api/#!bluetooth-scanning

 

I'm wondering is it possible to get data using MQTT or any other equivalent real-time protocols? I couldn't find anything related to this other than Scanning API.

 

Thank you in advance.

 

2 REPLIES 2
bmehta
Meraki Alumni (Retired)
Meraki Alumni (Retired)

Hello @thejrace ,

On the newer models of access points MQTT feature is available. 

In order to start configuring MQTT service on MR, please go to Wireless > IoT Settings > MQTT Settings.

Select Enable on  Stream Telemetry via Access Points in order to display all Settings to be configured.

Let me know if any concerns. There should be a document available soon and I will share it here.

Brash
Kind of a big deal
Kind of a big deal

I've not tested with MR33's but they are Wifi 5 wave 2 AP's so they should support MQTT streaming.

 

This doc is fairly helpful regarding config and the MQTT schema

https://documentation.meraki.com/MR/Other_Topics/MR_MQTT_Data_Streaming

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels