cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Channel utilization is high

Highlighted
Comes here often

Channel utilization is high

We are using the MR-52 running with MR 25.13 version firmware.

the channel utilization for 5 band is going high nearly reaching 95%

 

What can we do to bring this to normal??

 

Note:-no nearby AP's channel are overlapping with this one..

 

 

 

8 REPLIES 8
Highlighted
Kind of a big deal

Re: Channel utilization is high

is this Channel 5 or 5Ghz?

Highlighted
Comes here often

Re: Channel utilization is high

its 5ghz

Highlighted
Kind of a big deal

Re: Channel utilization is high

It would just be one of your clients.  Does the AP show lots of throughput?

Highlighted
Comes here often

Re: Channel utilization is high

How to identify that client????

Sometime throughput is high ???

Highlighted
Kind of a big deal

Re: Channel utilization is high

If you click on an AP you can see the clients and their usage.

 

1.PNG

Highlighted
Comes here often

Re: Channel utilization is high

Hi ,

 

Ya ok,

But how to identify that particular client .

Since we have more number of user.

 

Regards,

Ashi

Highlighted
Head in the Cloud

Re: Channel utilization is high

Have you tried another channel?
There could be non-wifi interference with a high duty cycle.

In case of high usage due to someone overusing it, then just put a per client bw limit.

Highlighted
Comes here often

Re: Channel utilization is high

dint tried to change the channel.

Already have per client Bw restriction 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.