Channel utilization is high

AsHik
Comes here often

Channel utilization is high

We are using the MR-52 running with MR 25.13 version firmware.

the channel utilization for 5 band is going high nearly reaching 95%

 

What can we do to bring this to normal??

 

Note:-no nearby AP's channel are overlapping with this one..

 

 

 

8 Replies 8
SoCalRacer
Kind of a big deal

is this Channel 5 or 5Ghz?

AsHik
Comes here often

its 5ghz

PhilipDAth
Kind of a big deal
Kind of a big deal

It would just be one of your clients.  Does the AP show lots of throughput?

AsHik
Comes here often

How to identify that client????

Sometime throughput is high ???

PhilipDAth
Kind of a big deal
Kind of a big deal

If you click on an AP you can see the clients and their usage.

 

1.PNG

AsHik
Comes here often

Hi ,

 

Ya ok,

But how to identify that particular client .

Since we have more number of user.

 

Regards,

Ashi

GIdenJoe
Kind of a big deal
Kind of a big deal

Have you tried another channel?
There could be non-wifi interference with a high duty cycle.

In case of high usage due to someone overusing it, then just put a per client bw limit.

AsHik
Comes here often

dint tried to change the channel.

Already have per client Bw restriction 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels