ARP Failures: How to fix

robjduk
New here

ARP Failures: How to fix

Good morning,

 My site has been Meraki and trouble-free for 5 years but recently we have had to restart AP's left, right and center to combat slow speeds and connectivity issues.

 This morning I have noticed many AP's have "ARP failures" but am struggling to find out how serious this is and how to remedy the issue. The Meraki notes I found don't seem to explain it all that well. From what I gather, its maybe a problem when a client roams between AP's and guessing it can be ignored but feel I should be doing something.

 

Thank you

1 REPLY 1
PhilipDAth
Kind of a big deal

Often that means it is having trouble contacting the default gateway.  Is a Meraki MS or MX the default gateway for the APs?

 

Also, check Organization/Firmware Upgrades, and see if there have been any recent firmware updates around the time the problems started.

 

While you are there, check that the APs are running a minimum of the latest stable firmware.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.