cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

VLAN isolated

Building a reputation

VLAN isolated

 

 

in my core I have my vlan configured but I want to create a new vlan (vlan 44) but this vlan 44 I want the traffic to be isolated is to say that there is no inter-vlan.

 

I did it through ACL as shown in the following image.acl.png

 

but in this way those that are in VLAN 44 do not receive dhcp
(DHCP is 10.52.44.1)

In what way can I make the VLAN isolated ???

3 REPLIES 3
Kind of a big deal ww
Kind of a big deal

Re: VLAN isolated

allow 10.52.44.0/24 10.52.44.0/24 v44

deny any any v44

 

Kind of a big deal

Re: VLAN isolated

Is the DHCP server in the same VLAN?  If so, just remove the layer 3 interface from the switch.  Then there is nothing that can do routing.

 

In not, you'll need to do inter-vlan routing to get DHCP request to the DHCP server and the replies back.

Highlighted
Building a reputation

Re: VLAN isolated

if the DHCP is in the same VLAN
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.