User connection speed slow

Dennis_S
Here to help

User connection speed slow

I have a site with an MX65 and a MS120-24P behind it. The internet circuit speed is 100M. The connection between the MX and MS is 1GB.   When I have a user connected to the switch (with or without a phone in the link) that is only getting ~20MB. If this user connects to the MX the speed is ~95MB.

 

This is the first time I have run across this (I have 38 other sites). I have an open TAC case to investigate. I am currently being told there is a possible buffer issue and the Dev team is working on it.

 

Has anyone else run into this issue?

 

-Dennis

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

Sounds like a speed/duplex issue to be.

 

Is the port between the MX and MS both auto/auto?  Tried replacing that cable?

Is the port on the MS going to the user set to auto/auto?

Found it. Someone had change the bandwidth on the traffic shaping to 20M.   I apparently missed it in my investigation. I fell into the trap of looking for something complicated instead of checking on all the basics first.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels