SmartPorts Automation

[Mikkelsen]

Hi

I'm currently testing the SmartPorts Automation feature, but I can't get it working everytime

I'm using a MS130-24P with 17.2.1 and a Meraki CW9162 AP to test on. 

I can't figure out if I'm doing something wrong or if this feature isn't 100% stable yet.

-----

My configuration

The LLDP info on the AP
System Description:
Meraki CW9164I Cloud Managed AP

But the switch still apply the default profile to the port

I have tried different settings in the automation, an sometimes it works. But not always.
If I, for example reboots the switch, the switchport always apply the default profile.

[Mikkelsen]

also the same with this simple match criteria

[Ryan_Miles]

Perhaps related to this issue https://community.meraki.com/t5/Dashboard-Administration/CDP-LLDP-Dashboard-Information-for-Access-P...

Maybe try a different rule based on the MAC OUI and see if that's more stable for now.

[Mikkelsen]

I have tried just to add c4:d6:66* as an match criteria. 
After updating the automation profile the switch applied the smart profile. 

But after a reboot of the AP the switch applied the default profile again.