Sfp compatibility on 390s

ammahend
Getting noticed

Sfp compatibility on 390s

MA-SFP-10G-SR on meraki 390 side, SFP-10/25G-CSR-S on cisco 9500 side, has anyone tried this and will this work ? 

3 REPLIES 3
BlakeRichardson
Kind of a big deal

I would have thought it should work as the SFP-10/25G-CSR-S is dual speed but if it doesn't work then its most likely the SFP-10/25G-CSR-S isn't auto sensing the link speed so you might need to manually set it. 

www.btr.net.nz

Thanks for the reply, You mean manually set speed to 10G on 9500 side ? 
hopefully someone is in similar situation and can confirm if it works with setting speed manually. 

Yes if the 9500 doesn't auto detect you may need to manually set the link speed. 

www.btr.net.nz
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels