Setup OSPF between MS and Sophos XG 330

DBesa
Here to help

Setup OSPF between MS and Sophos XG 330

Hi,

 

Anyone of you have any experience in setting up OSPF between a L3 MS Switch and Sophos XG Firewall? We wanted to go with the MX but unfortunately it doesn't support SSL VPN.

 

Thanks!

 

Desmond

3 REPLIES 3
TonyC
Meraki Employee
Meraki Employee

No direct experience but both support OSPFv2 so should be fairly straight forward!

NathanG
Meraki Employee
Meraki Employee

G'day Desmond,

Great question you have there.

Though I can't offer any personal experience integrating an MS to a Sophos device via OSPF, given it's a standards based protocol, it should work out nicely.

 

Take a look at this article as a starting point: 

https://documentation.meraki.com/MS/Layer_3_Switching/MS_OSPF_Overview

 

It'd be helpful to hear back about your experience.

 

Nathan

Thanks, Nathan. I will give this a read and will try to setup OSPF between the two devices. Thanks!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels