cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Redundant uplinks from MS425 to MX250

Getting noticed

Redundant uplinks from MS425 to MX250

I have 2 MS425 in a stack with 2 MX250 in HA with a VRRP vlan and cable. I need failover for the MS425 stack . When port 1 on each core is connected to port 8 on each MX I get a loop. What is the preferred config to achieve stack failover?

3 REPLIES 3
Kind of a big deal

Re: Redundant uplinks from MS425 to MX250

Getting noticed

Re: Redundant uplinks from MS425 to MX250

Thought about that but then there is the 2 internet edge switches (not stacked) with redundant ISP uplinks. 

Kind of a big deal

Re: Redundant uplinks from MS425 to MX250


@Netwow wrote:

Thought about that but then there is the 2 internet edge switches (not stacked) with redundant ISP uplinks. 


So?

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.