Port stack

nst1
Building a reputation

Port stack

 

I can connect the stack cables in any port of the switch or do I have to use some in specific ???

1 REPLY 1
PhilipDAth
Kind of a big deal
Kind of a big deal

If you are referring to physical stacking and if it is an MS210, MS225, MS250, MS350 or an MS410 you use the stacking ports on the back.  They are the only ports you can plug into.

 

The MS425 has flexible stacking, so you can use ports on the front, but you would normally still use the ports on the back.

 

If you are referring to virtual stacking you can connect them anyway you want.

 

 

Here is an article about stacking:

https://documentation.meraki.com/MS/Stacking/Switch_Stacks

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels