PoE Overload Error on MS120 on unused port

Here to help

PoE Overload Error on MS120 on unused port

We have three switches showing this same issue.

A port that has no connection and has had none for the last month.

Port is not drawing power

Port is showing a PoE overload error.


Reset of the port does not seem to have a difference.

Firmware version 14.33 on the switches.


2 Replies 2
Kind of a big deal
Kind of a big deal

I would try and schedule in a reboot.


What does the switch show as its total PoE load versus what it says the power supply can deliver?

New here

I'm having the same issue on a MS225-48LP, nothing is plugged in to the ports and it even says Not Drawing Power, yet the ports are in error state (8 of them). I've even disabled the ports, but they still say PoE overload. I've completed a reboot, no change. Current version: MS 14.32

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.