Migrating c4500x and c2960 to Meraki MS410 , MS250

[patkm]

Anyone has a good documentations/ guidance to transfer  config  across manually or automatically. from c4500x and c2960 to Meraki MS410 , MS250.

How to config VLANs, portchannel, ACL, Qos, ospf, static routes etc. Thanks

[alemabrahao · Accepted solution]

There is no documenttion to migrate a catalyst switch for a MS switch, but you can find everything what you want here.

https://documentation.meraki.com/MS

[alemabrahao]

https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Named_VLANs_in_MS_Configurations

https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports#Link_Aggregation

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_and_Routing

https://documentation.meraki.com/MS/Layer_3_Switching/MS_OSPF_Overview

https://documentation.meraki.com/MS/Other_Topics/MS_Switch_Quality_of_Service_Defined

https://documentation.meraki.com/MS/Other_Topics/Switch_ACL_Operation

[patkm]

Thanks for your reply, that is helpful

[PhilipDAth]

In the Meraki github there are several migration scripts to assist.

https://github.com/meraki/automation-scripts 

There is no direct migration for a 4500 - as they have lots of slots, and an MS switch is effectively "one slot" - but you could modify the "migrate_cat3k" script to copy the different blades to different switches.