Meraki MS425 with multi chassis etherchannel

SOLVED
NilsWi
Here to help

Meraki MS425 with multi chassis etherchannel

Hello all,

We would like to set up a MS425 between 2 DataCenters (approx. 100m distance) as a flexible stack.

Does the MS425 stack work similar to a C9500 VSS ? For example, is it possible to configure a multichassis etherchannel so that traffic is routed through both ports?

 

Thank you for ur help!

 

kind regards

Nils 

Nils Winkel
1 ACCEPTED SOLUTION
KarstenI
Kind of a big deal
Kind of a big deal

Yes, it works similar and it is possible to configure Ether-Channels that are active on both stack-members. What is not available compared to the Cat9500 VSS is dual active detection on an additional link.

 

BTW: Today I would likely not buy the pair of MS425 but instead a pair of 9500s. They can be added to the Meraki dashboard and eventually also be cloud managed.

View solution in original post

1 REPLY 1
KarstenI
Kind of a big deal
Kind of a big deal

Yes, it works similar and it is possible to configure Ether-Channels that are active on both stack-members. What is not available compared to the Cat9500 VSS is dual active detection on an additional link.

 

BTW: Today I would likely not buy the pair of MS425 but instead a pair of 9500s. They can be added to the Meraki dashboard and eventually also be cloud managed.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels