Meraki MS Port Isolation

[sharon_k]

hi,

can i implement port isolation on the MS130 switches ? 

thanks 

[RWelch]

Yes.

Restricting Traffic with Isolated Switch Ports  

[sharon_k]

thanks, but the link includes only the switches models MS210, MS225, MS250, MS350, MS355, MS410, MS450 ,MS425 and MS390.

[RWelch]

Interesting.

I do see the MS Series listed above (switches models MS210, MS225, MS250, MS350, MS355, MS410, MS450 ,MS425 and MS390), however I do have two MS130-8X switches in my network and enabled it on the same VLAN and traffic did NOT pass to one another but each client was able to traverse the gateway to the internet (i.e., it worked as port isolation should).

 

Maybe the documents/data sheets need to be updated....? 

[sharon_k]

great, thanks 🙂

have a great day 

[RWelch]

Welcome 🙂

[Ryan_Miles]

I submitted doc feedback to have it updated. Port isolation should work on all models (120, 125, 130, 150, etc.).

[RWelch]

Thank you @Ryan_Miles 

[RWelch]

Looks like the page was last updated 8/8/2025 but the MS lines were updated 😥.  At least we tried.

Restricting Traffic with Isolated Switch Ports 

Still shows:
Port isolation on MS switch models MS210, MS225, MS250, MS350, MS355, MS410, MS450 and MS425 series will block all traffic (L2/L3) between 2 switch ports with port isolation enabled in the same or different VLANs on the same switch.