Meraki MS - ACL

Pavan_Pawar
Getting noticed

Meraki MS - ACL

Hello Experts,

 

I'm creating ACL on MS Switch and did not find an option to apply it anywhere.

so does it get applied automatically to all interfaces in both directions of the switch and does it also get applied to all switches which are part of the network?

 

-Pavan

1 REPLY 1
Brash
Kind of a big deal
Kind of a big deal

A defined ACL will apply to all switches within the network.

All traffic that goes through the switch is evaluated by the ACL before being forwarded. That includes L2 traffic between ports on the same switch. 

 

The following links provide more in depth information on this.

https://documentation.meraki.com/MS/Layer_3_Switching/Configuring_ACLs

https://documentation.meraki.com/MS/Other_Topics/Switch_ACL_Operation

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels