MX450 to MS450

[jrhead]

I have two MX450 and two MS450.  How can I connect the MX450 to the MS450?

Everything I have read and tested is the MS450 will not support a breakout cable to go from QSFP to SFP+.  Also the MS450 does not allow manual Link Configuration.

I have tried a QSFP to SFP+ converter in the MS450.  I get a link light on the MX450 side with the SFP+ adapter but no link like on the MS450 side.  

I validated the SFP+ adapters work by linking the two MX450 together.

[alemabrahao]

Take a look at the documentation.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

https://documentation.meraki.com/Architectures_and_Best_Practices/Recommended_Topologies/MX_and_MS_B...

But in other words you must connect via fiber SFP or twisted pair cable.

[jrhead]

Thanks for the quick response but it does not address the physical hurdle of connecting the MS450 that only has QSFP ports to the MX450 that has no QSFP ports.

[alemabrahao]

I got it. Connect them directly using a  Twinax Cable.

https://meraki.cisco.com/pt-br/product/security-sd-wan/appliances-accessories/ma-cbl-ta-3m-2/

[alemabrahao]

Thinking about it, I don't think it will be possible and you will have to have another switch between them like an MS425.

[jrhead]

The MX450 has no QSFP ports or stacking ports.  

[alemabrahao]

 I don't think it will be possible and you will have to have another switch between them like an MS425.