MS390 and MA-MOD-8X10G local configuration

[CodyA1]

I have an MS390 with a MA-MOD-8X10G module installed. In the local configuration page it won't let me set any of the ports to 10Gbps full duplex forced. 1Ghbps is the highest speed listed.

[alemabrahao]

It is not possible to force 10Gb, just leave it in auto mode.

[alemabrahao]

We had a big discussion about this.

https://community.meraki.com/t5/Switching/Basic-Speed-Duplex-functionality-of-device-ports/m-p/17510...

[CodyA1]

TAC just told me that it's a known issue that is being worked on with the development team and there is currently no ETA on when it will be fixed. Thats awesome...

[GreenMan]

As mentioned before, with that module, the connected rate comes from the installed SFP.   They do not train up or down, therefore why would it need to be configurable?   If you want a 10G link, install a 10G SFP+   If you want a 1G link, install a 1G SFP.