cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MS220-48LP device uptime

Highlighted
New here

MS220-48LP device uptime

What is the easiest way to see uptime on meraki switches? I cant find it in the dashboard.

 

Thanks!

11 REPLIES 11
Building a reputation

Re: MS220-48LP device uptime

Other than the 30 day history, I don't think there is a way to see those details. If you do find a way, post it here. Or we might have to "Make A Wish" for it. 

Getting noticed

Re: MS220-48LP device uptime

@BrandonN

 

 

Definitely wish the devices would show uptime!!!!

 

I search the logs for power supply inserted. That message appears upon bootup, so if I see that I know the switches rebooted. 

New here

Re: MS220-48LP device uptime

@bholmes12 I am not sure if it is possible to raise a future request with your SE, but yes I think this info is very valuable. 

Kind of a big deal

Re: MS220-48LP device uptime

Any way to see the uptime on an MX?

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Kind of a big deal

Re: MS220-48LP device uptime

@Adam Same as the MS - no uptime available besides the 30 day connectivity history. I believe Support has access to actual uptime though. 

MRCUR | CMNO #12
Kind of a big deal

Re: MS220-48LP device uptime

Thanks I'll put in a ticket to ask. 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Building a reputation

Re: MS220-48LP device uptime

I know my MX64 rebooted on Oct 20th at around 6:23pm as that's when I updated the firmware on it. So I went into the event log and looked for anything before 6:30pm on Oct 20th and saw that these two events were right beside each other. Course that depends on you using the advanced security license and having AMP enabled.

 

Oct 20 18:24:30 Primary uplink status changeuplink: 0
Oct 20 18:24:22 Intrusion detection startedsnort_rules_version: 2.9.8.3, source: ids-vrt-security, rules: 9fecd6b063736903e331e0db3b5192cbc10b7b72
Here to help

Re: MS220-48LP device uptime

Use the 'Make a Wish' button on the status page. That's what I've been doing. If I needed to know the CPU utilization or uptime stats on a device, I just call support and ask them, they've been happy to tell me without needing to put a ticket in.

________________________________________________
[root@allevil ~]$
Kind of a big deal

Re: MS220-48LP device uptime

It would be nice to see this as a column for all devices.  We had an issue where a switch was regularly rebooting.  The switch would come back online before our 5 minute downtime alert would trigger so we had no idea the issue was happening until users reported it.  

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Meraki Employee

Re: MS220-48LP device uptime

Agree with earlier posts this is a good ask, and unfortunately is not visible in Dashboard, at least not yet.  It is also not available (again at least not yet) via Dashboard API calls.  Confirmed that Meraki Support can see uptime info and past reboot history and share with you.  In the meantime, leverage what you can from the configurable alerts, the Event Log (for example Primary Uplink Status Change on the MX or Power Supply Inserted on the MS), keep the wishes coming, and work with your respective Meraki or Partner sales teams to echo this feature request to the Dashboard team.  

Here to help

Re: MS220-48LP device uptime

As others have mentioned, there is no way to see the raw uptime in the dashboard. Please drop this in the 'make a wish' box.

If you really need the data, you can likely check with support.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.