Linking an MS355 to Dell Force 10 MXL

cmr
Kind of a big deal
Kind of a big deal

Linking an MS355 to Dell Force 10 MXL

We are looking to link a stack of MS355s to a pair of Dell Force 10 MXL switches in a blade chassis.

 

I know it is sold as a stacking cable but has anyone had any luck using the MA-CBL-40G-3M as an uplink cable?

 

With the Force 10 switches pretty much anything works, but we have some HP 10GbE switches where passive twinax cables just don't connect despite being recognised...

1 Reply 1
cmr
Kind of a big deal
Kind of a big deal

Support have advised that as the stacking cable is simply a standard twinax cable then it should work for normal data port connections (on a Meraki switch) so we're going to try a 1M one that we can temporarily remove from a stack...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels