DHCP Timeout-Cisco IP Phone

Krishna
New here

DHCP Timeout-Cisco IP Phone

I am using Meraki MS 250,Cisco IP Phone 7961 and ISE 2.4.Here I configured Hybrid-Authentication as the access policy type and enabled Increase access speed. I assigned this access policy to a switch port configured with Voice Vlan. When I am connecting the IP phone to the switch port I can see MAB is successful on Cisco ISE but IP phone is not getting the IP address. In the status I am seeing IPV4 DHCP TIMEOUT on the phone( note: When I am going with only MAB on the access Policy it is working fine)

Any of you tired this use case and successful?

1 REPLY 1
PhilipDAth
Kind of a big deal
Kind of a big deal

I don't know the answer.  I would make sure you are using recent 10.x code on the switch.

 

It sounds like the MAB policy is not permitting access on the VoIP VLAN to the DHCP server - or is not permitting it quickly enough for the DHCP to succeed.

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels