cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Configuring Monitoring On Specific Ports On

SOLVED
Highlighted
Conversationalist

Configuring Monitoring On Specific Ports On

Hello All, 

 

Is it possible to configure alerts on say just one or a couple of ports of my choosing? I am only seeing the option to configure alerts on all ports. I am only concerned about getting alerts on several ports that are used for our camera system. 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: Configuring Monitoring On Specific Ports On

If you set tags on your camera ports you can set the alert to be based on that tag.

 

image.png

View solution in original post

3 REPLIES 3
Highlighted
Kind of a big deal

Re: Configuring Monitoring On Specific Ports On

You can tag the ports you want to get alerts about with a unique tag and configure that tag in the Network-wide > Alerts page. The tag can be selected for up/down alerts, speed changes, and cable errors.

Highlighted
Kind of a big deal

Re: Configuring Monitoring On Specific Ports On

If you set tags on your camera ports you can set the alert to be based on that tag.

 

image.png

View solution in original post

Highlighted
Conversationalist

Re: Configuring Monitoring On Specific Ports On

Thanks for your assistance! 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.