Configuring Monitoring On Specific Ports On

SOLVED
vPhillyCheese
Conversationalist

Configuring Monitoring On Specific Ports On

Hello All, 

 

Is it possible to configure alerts on say just one or a couple of ports of my choosing? I am only seeing the option to configure alerts on all ports. I am only concerned about getting alerts on several ports that are used for our camera system. 

1 ACCEPTED SOLUTION
jdsilva
Kind of a big deal

If you set tags on your camera ports you can set the alert to be based on that tag.

 

image.png

View solution in original post

3 REPLIES 3
BrechtSchamp
Kind of a big deal

You can tag the ports you want to get alerts about with a unique tag and configure that tag in the Network-wide > Alerts page. The tag can be selected for up/down alerts, speed changes, and cable errors.

jdsilva
Kind of a big deal

If you set tags on your camera ports you can set the alert to be based on that tag.

 

image.png

Thanks for your assistance! 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels