Clarification on SFP Compatibility with MS130 Model vs MS130-x?

Solved
MauroF
Getting noticed

Clarification on SFP Compatibility with MS130 Model vs MS130-x?

Hi All,

I’ve bought an MS130-24P, and looking at the Meraki SFP compatibility page, I see that my SFP is only listed as compatible with the MS130-X.

Considering that the same compatibility page lists the MS130 and MS130-X as if they were two different models, which is confusing. My question is: Is the SFP highlighted in purple compatible with my MS130 model?

 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Small-Form_Factor_Plu...

 

MauroF_1-1729672977079.png

 

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

The MS130 switches ending in "X" have 10Gbe SFP+ uplinks.

The switches without an "X" (like the MS130-24P) have 1Gbe SFP+ uplinks.

View solution in original post

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

The MS130 switches ending in "X" have 10Gbe SFP+ uplinks.

The switches without an "X" (like the MS130-24P) have 1Gbe SFP+ uplinks.

MauroF
Getting noticed

So my sfp  it is or its not compatible?

PhilipDAth
Kind of a big deal
Kind of a big deal

Not compatible.  You can not plug a 10Gbe SFP into a 1Gbe port.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels