Cisco Meraki MS-120 Switch

Vaishkhan
Comes here often

Cisco Meraki MS-120 Switch

Hi Everyone,

I have two VLAN 410(Core) and 490(Untrusted) in same switch. there is one Access point connected in vlan 490 and acquired IP 192.168.90.3 from DHCP.

I am able to ping AP ip from 410 vlan but on browser not able to access on port 80. but when I connect any laptop or PC in 490 vlan, AP gets access on browser.

 

Allowed rules on firewall: 

 

Vaishkhan_0-1598296331649.png     

Vaishkhan_1-1598296331652.png

Vaishkhan_2-1598296331654.png

 

Please Guide.

 

Thanks.

 

Thanks & Regards
1 REPLY 1
cmr
Kind of a big deal
Kind of a big deal

@Vaishkhanan MS120 isn't a layer3 (routing) switch, it is layer2 only.  It needs a layer 3 device to pass the VLANs to where they can then be routed to each other.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels