Cannot find switchport setting to trust DSCP tagging for MR AP uplinks

SOLVED
CHAadmin
Getting noticed

Cannot find switchport setting to trust DSCP tagging for MR AP uplinks

Using the full stack from Meraki.

 

Meraki MR documentation for QoS says to make sure switchports that uplink MR APs respect inbound DSCP tagging from the APs.

 

Is that a switchport setting (e.g. STP Guard or Trust DAI)? Or is it a QoS setting?

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal

Go to switch/switch settings.

 

PhilipDAth_0-1633301686245.png

 

View solution in original post

3 REPLIES 3
PhilipDAth
Kind of a big deal

Go to switch/switch settings.

 

PhilipDAth_0-1633301686245.png

 

View solution in original post

So I would enter each VLAN I'm tagging per SSID and set the value to Trust DSCP correct?

PhilipDAth
Kind of a big deal

Yes.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels