Hi!
I am having a problem configuring a network with multiple tenants in a building, but I want to control the flow of traffic and the speed that the respective tenant can use.
Site info:
- The site today is getting its Wan connection from a fiber converter from the ISP via a RJ45 connection.
- The ISP is delivering 5 IPs and a speed of 1 Gbs.
- There is a Meraki MS-120 8 port acting as a split after the ISP to have the ability to connect multiple tenants in the building from the room where the fiber is delivered to.
- From that one cable is going to the third floor where my main equipment is located, on cable is going to another customer in the building and a 3 on to a 3rd customer.
My dilemma:
I want to set up the network so that I can control all the customers network speed and so that my equipment is running full speed.
My first thinking was to do this with Vlans do to that I can’t set the speed limit on the specific port or set the policy on the client do to that it is technically no connected to on of my Vlans. See image
![Drawing (1).png Drawing (1).png](https://community.meraki.com/t5/image/serverpage/image-id/26599i126EB3A2A241C5B3/image-size/large?v=v2&px=999)
How can I best solve this problem
I want to limit the speed for the customer to 100 Mbs