Backup of switch configurations

Neal
Comes here often

Backup of switch configurations

Can anyone tell me if switch configurations are backed up? More importantly, if I replace a switch,

will the configuration automatically be downloaded as long as I use the same LAN ip of the replaced

switch.

                                                         Thanks.......Neal Huhn

2 Replies 2
PhilipDAth
Kind of a big deal
Kind of a big deal

The configs are store in Meraki's cloud.  If you need to replace a switch you use the "clone" function to copy the config from the old to new switch.

 

https://documentation.meraki.com/MS/Other_Topics/Switch_Cloning

Adam
Kind of a big deal

What @PhilipDAth linked is the resource you need.  It doesn't matter if you set the same LAN address.  The switch just needs to be the same model.  Then you can clone the config.  The only things that don't clone are the switch name, address, IP address.  

 

Usually, when you are doing the switch replacement you'll also still have the old one in the dashboard to reference for a little bit if you need it.  

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels