Additional VLAN with reserved bandwidth

ruleofindex
Just browsing

Additional VLAN with reserved bandwidth

Hello community, @marce1000 suggested to post this also here from here

 

I've a MS355-48X switch in place and want to implement an additional VLAN or SSID with a reserved bandwidth. Right now there are 2 active SSID without bandwidth restricions. It looks like this is only possible with a L3 switch and not with a L2 switch since for VLAN tagging the switch must support IEEE 802.1Q.

 

Any suggestions on how to achieve this with my current switch?

 

Thank you for any hint.

2 Replies 2
ww
Kind of a big deal
Kind of a big deal

Ms switches can do 802.1Q, just configure a port to be a trunk. If you want a layer3 svi on the switch thats also possible with MS355-48X, then you need to enable the routing.

 

Where is you routing configured now?

Why you want another vlan? Ms switches/vlans cant do shaping.

So you need to do shaping on the ssid or on the router. And you can also do firewalling  on the ssid if needed

I want to have a group of people using a VLAN (or a specific SSID) with a reserved bandwidth to make sure they have enough bandwidth and thus prevent other groups from completely consuming the total available bandwidth.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels