"WAN failover and failback behavior" on the template is not available.

[UsmanSa]

Unfortunately it looks like configuring "WAN failover and failback behavior" on the template is not available for networks in templates. It is not sure when WAN-1 link fails, if it is graceful or immediate failover as failover taking a while for network in a template. 

[Brash]

As per the following doc, templates don't support enhanced failover and thus go by the following failover rules:

Current implementation (without “Enhanced WAN failover and failback feature”)

• During failover (when primary link is lost) 

  • Existing flows will remain on the primary path until they expire.

  • New flows will route via the backup path

• During failback (when primary link is recovered) 

  • Existing flows will remain on the backup path until they expire.

  • New flows will route via the primary path

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Connection_Monitoring_for_WAN_Failo...

[UsmanSa]

My network has 3 templates and over 180 school branches. The default settings do no meet my requirement as when WAN-1 link goes down, there should be an immediate failover shifting the services to WAN-2. Sadly current setting are not of any use to our current network.